|
|
 |
 |
|
|
  |
|
|
|
|
|
|
As soon as you meet with the people at Austeng you will notice the enthusiasm for each project. This not only
translates to management but throughout the organisation.
All staff are multi-skilled and therefore get involved in each project giving it a mixture of experience, education
and youth.
The management team and engineers are supported by office staff,
draughtsmen, eighteen tradesmen including specialized pipe welders, boilermakers, sheet metal
workers and turning and fitting with additional tickets as crane drivers, riggers and chasers.
|
|
|
|
|
|
|
| |
|
|
 |
Ross George -
Managing Director. Bachelor of Mechanical Engineering with Honours,
Melbourne University 1981. Commenced his career at Australian Synthetic
Rubber Pty. Ltd., as a Project Engineer. Developed the Austpole Company
prior to developing Austeng. Ross not only brings engineering flair and innovative thought to
projects but he is also responsible for the overall management of the
company. |
| |
|
 |
John George - One
of the original shareholders and engineers. Over 40 years experience in engineering and administration,
he is now a consultant, thus helping to maintain his legacy of engineering
excellence. |
| |
|
 |
Lynette George - Corporate Manager.
Bachelor of Laws with Honours, Melbourne University 1982. Eight years
experience in commercial litigation. Performs legal and managerial
functions within the company. Her legal background, communications skills
and marketing skills add commercial depth to the company. |
| |
|
 |
Bruce Bennett - Project Manager. Bruce has worked in the company since 1983. Bruce's organisational and time management skills ensures our equipment is manufactured, gets to site and is commissioned in the best possible time with a minimum of fuss. His depth of experience and trade background in sheetmetal plus his exposure to the trade areas of
boilermaking, fitting and electrical bring a good balance to the management team. |
| |
|
 |
Ron McDonald - Design Manager. Graduated R.M.I.T,
Mechanical Engineering 1982. Since commencing employment with
Austeng in 1983 Ron has been involved in all aspects of the business including design, specification, procurement, manufacture, installation and commissioning. He now heads our design department. |
| |
|
 |
Marcus Cowie - A mechanical engineer from Monash University,
joined the company in 1994 and worked on a variety of projects in design,
mechanical, electrical and programming capacities. He specialised in control system design, electrical, pneumatic and hydraulic, and project management including commissioning. Marcus
now co-ordinates our service and maintenance section. |
| |
|
 |
Ean Droomer - A mechanical engineer from
Deakin University, Ean formerly worked for Ford Motor Company and has also
worked on a variety of our projects. His work now includes co-ordinating our
electrical section and commissioning. |
| |
|
 |
Tim Van Slageren - Furnace specialist
and A grade electrician. Tim has worked on our furnaces chiefly with our
licensor Furnace Construction Co. Ltd. for the last 15 years. He now project
manages most of our new furnace installations and upgrades. |
| |
|
|
|
![[Engineered Solutions]](images/nav_lt_engineered_off.gif){kind=small}
![[Company Profile]](images/nav_lt_company_off.gif){kind=small}
![[Projects]](images/nav_lt_projects_off.gif){kind=small}
![[No Job too Small]](images/nav_lt_no_job_off.gif){kind=small}
![[Customised Fabrication]](images/nav_lt_fabrication_off.gif){kind=small}
![[Crematoria]](images/nav_lt_crematoria_off.gif){kind=small}
![[Cemetery Equipment]](images/nav_lt_cemetery_off.gif){kind=small}
![[Awards]](images/nav_lt_awards_off.gif){kind=small}
![[Contact]](images/nav_lt_contact_off.gif){kind=small}
